LIST OF PUBLICATIONS OF PROF. (DR.) SADHAN CHANDRA RAY

 

 

List of Books Published

 

1.    Fundamentals and Advances in Knitting Technology, Woodhead Publishing India Pvt. Ltd., New-Delhi, India, October, 2011

 

2.    Technical Handbook on Jute Processing (Winding to Jute Finishing), Published by Institute of Technology, Kolkata, August, 2002 

Co-authors : A. K. Chakraborty & S. K. Ghosh

 

3.   Training Manual in Jute Winding, ,  Published by Institute of Jute Technology, Kolkata, March, 2001

Co-author : Prabir Ray

 

 

List of Research Papers Published in Journals

 

  1. Mechanics of the 1x1 rib loop formation process on a dial and cylinder machine:

          Part V – Analysis of the modelled system, accepted for publication in Indian

          Journal of Fibre and Textile Research, Co-authors: P. K. Banerjee

 

  1. Mechanics of the 1x1 rib loop formation process on a dial and cylinder machine:

          Part IV – Further Experiments under delayed timings, accepted for publication in Indian

          Journal of Fibre and Textile Research, Co-authors: P. K. Banerjee

 

  1. A study on dimensional parameters of 1x1 rib fabric produced in a flat bed double jersey knitting machine by using ultrasonic technique, accepted for publication in Indian Journal of Fibre and Textile Research

Co-author: Sandip Mukherjee and S. K. Punj

 

  1. “Dimensional properties of single jersey fabrics – a critical review” in Asian Textile Journal, September, 2007.

       Co-author : Sandip Mukherjee and S. K. Punj

 

5.      Dimensional properties of double jersey fabrics – a critical review, Asian Textile Journal, November, 2007

Co-author : Sandip Mukherjee and S. K. Punj

 

  1. Some studies on twist loss of weft yarn and its effect on the properties of fabric

             woven in air jet loom, Man-made Textiles in India, December, 2005, p460-462

             Co-authors : Ganesh Sharma & Nirmal Kumar Pore

 

  1. Mechanics of the 1x1 rib loop formation process on a dial and cylinder machine:

             Part III – Validation of the model, Indian Journal of Fibre and Textile Research,

             September, 2003, p246-259

             Co-author : P. K. Banerjee

 

  1. Mechanics of the 1x1 rib loop formation process on a dial and cylinder machine:

             Part II – Measurement of cam force, Indian Journal of Fibre and Textile Research,

             September, 2003, p239-245

             Co-author : P. K. Banerjee

 

  1. Mechanics of the 1x1 rib loop formation process on a dial and cylinder machine:

             Part I – Modelling of the loop formation process, Indian Journal of Fibre and Textile

             Research, June, 2003, p

             Co-author : P. K. Banerjee

 

  1. Effect of weave on properties of P/V blended fabrics, Modern Textile Journal,

             May-June, 2002, pp

             Co-author : G. Sarkar and U. Dutta

 

  1. Some studies on splicing and knotting of yarn, Asian Textile Journal,

             November, 2000, pp

             Co-author : A. Majumdar, S. Dey, K. Lahiri and S. Dasgupta

  1. Some preliminary investigations into mechanics of 1x1 rib loop formation process

             on dial and cylinder machine,  Indian Journal of Fibre and Textile Research,

             June, 2003, p

             Co-author : P. K. Banerjee

 

  1. Some studies on the physical properties of DREF2 spun yarn, Asian Textile Journal,

             3(10), 1995, pp80-84

             Co-author : S. K. Sett and A. Mukherjee

 

  1. Mean fibre extent of rotor spun yarn, Indian Journal of  Textile Research,

             June, 2003, p

             Co-author : Bhaskar Dutta

 

  1. Effects of spacer on yarn quality, Textile Trend, May, 1987, pp51-53

 

  1. Effects of different drying conditions on silk cocoons, Indian Textile Journal,

             November, 1986, pp106-107

             Co-author : N. C. Khan and D. Sengupta

 

  1. Properties of marketed fabrics, The Textile Industry and Trade Journal,

             1986, pp33-41

 

 

A.    List of Papers Presented in Seminars/Workshops

 

1.      Systematic value addition in jute can ensure its sustenance and livelihood of millions, International Symposium on “System Intensification towards Food and Environmental Security”, organized by the Crop and Weed Science Society, BCKV at Kalyani on February 24 – 27, 2011.

 

2.      Innovative Jute Products for Technical Applications, 23rd National Convention of Textile Engineers, Jointly organized by the Institute of Engineers (I) and Department of Textile Engineering, IIT Delhi at New Delhi on 26th and 27th march, 2010

 

3.      “Air-jet weaving and twist loss in air-jet woven fabrics” in the Annual Seminar of the Textile Association (I), W. B. Unit in February, 2008.

 

4.      Science and Technology of Garment Fit & Size, 59th Annual Conferrence of the Textile Association (I), West Bengal State Centre held at Kolkata on 20th Feb., 2010

 

5.      New developments and trends in Handloom Sector, National Handloom Expo, Organized by the Boyanika, Govt. of Orissa at Bhubaneswar on 25th January, 2010

 

6.      Scopes and Applications of Jute in Technical Textiles, AICTE Sponsored National Seminar on “Technical Textiles” organized by the Dept. of Textile Technology, College of Engineering and Technology, Bhubaneswar, Orissa, held on 20th  & 21st August, 2009

 

7.      Towards Sustainable Development in Handloom Sector in India, All India Seminar on “Sustenance of Developments in Handloom Sector” organized by the Institute of Engineers (I), Bhubaneswar, Orissa, held on 7th & 8th August, 2009

 

8.      Scenario of Developments in Jute & Other Textiles, Eleventh Technology Day Celebration of the Institution of Engineers (I), W. B. State Centre, held on 6th April, 2009

 

9.      Production of 3-D Fabrics, Seminar organized by the Dept. of Textile Technology, College of Engineering and Technology, Bhubaneswar, Orissa, held on --------    , 2009

 

10.  Developments in Nonwoven Recent Developments in Nonwoven Technology, Half Day Seminar on the 57th AGM of the Textile Association (I) of the West Bengal Unit on 2nd September, 2007

 

11.  Objective Measurement of Low Stress Mechanical Properties of Fabrics (Kawabata & FAST Systems), Annual Technological Conference on “ ” organized by Textile Association (I), W. B. State Centre on

 

12.   Development of Jute Belt and Pre-fabricated Vertical Drain (PVD) in high speed needle loom, All India Seminar on “Exportable Jute & Textile Products” held on 29th & 30th March, 2006 at Institution of Engineers (I).

 

13.  Measurement of cam force in the study of mechanics of 1x1 rib loop formation on a  

      dial and cylinder machine, National Conferrence on Emerging Trends in Textile, fibre

      and Apparel Engg. Organized by Government Colleg of Engineering and Textile

      Technology on 18th & 19th March, 2006

 

14.  Production of medical textiles in knitting, One day technological conference on

      “Emerging Scenario in Textile Sectors” organized by Textile Association (I), W. B.

      Unit on 19th February, 2006

 

15.  Production of Jute Based Technical Textiles using High Speed Needle Loom, One

      Day Workshop on Technical Textiles organized by Institute of Jute Technology on

      6th February, 2006

 

16.  Basics of Warp Knitting, Technical seminar organized by the Textile Association (I), W. B. Unit on 31st August, 2005

 

17.  Some aspects of garment manufacturing and knitting, All India Seminar on

      Sustainable development in Jute and Textile Industry, Organised by the Institution

      Of Engineers (I), Kolkata on 26th & 27th March, 2004

 

18.  Application of CAD/CAM in Textiles, Seminar organized by the Students’ Chapter of

      Institution of Engineers (I), College of Textle Technology, Berhampore on 27th

      February, 2004.

 

19.  Scope of Knitting in garment manufacturing, National Seminar on --- organized by  the College of Textile Technology, Serampore on 23rd January, 2004

 

20.  Measurement of cam force on a dial and cylinder (double jersey) machine using piezo-electric force, NCUTE workshop organized by College of Textile Technology, Serampore on November, 2003

 

21.  Modern developments in knitting, National workshop on knitwear industry with focus on eastern region, organised by National Institute of Fashion Technology, Kolkata at Hotel Taj Bengal on 09-12-1999

 

22.  Knitting in twenty first century, Annual Conferrence of the Textile Association of India (W. B.) in Calcutta, January, 1999

 

23.  Production of diversified jute fabrics in handlooms, National Workshop on Handloom    jointly organized by the Handloom Development Corporation and National Institute of    Research on Jute and Allied Fibre Technology, June, 1999   

Co-authors : S. Chakraborty and P. Ray

 

24.  HRD support in North Bengal by Institute of Jute Technology under National Jute     Programme in a Workshop on EDP at Siliguri organized by Jute Manufactures      Development Council, November,1996    

Co-author : D. K. Sinha

 

25.  HRD support in North Eastern States by Institute of Jute Technology under National Jute  Programme in a Workshop on EDP at Guwahati jointly organized by the Directorate of Industries, Assam and National Centre for  Jute Diversification, March,1996    

Co-author : D. K. Sinha

 

26.  Some studies on the physical properties of DREF2 spun yarn, U. N. D. P. Workshop      organized by Wool Research Association, Thane, December,1995       

Co-author : S. K. Sett and A. Mukherjee

 

 

C.  List of Technical/Review Papers Published in Journals

 

1.      Scope of Jute in Knitting, Annual Journal of the Re-Union Committee, Institute of Jute

       Technology, 11th January, 2006

 

2.      Jute – the Golden Fibre of India, Modern Textile Journal, Jan – Feb, 2004, P70-82

 

3.      Production of diversified jute products/fabrics in handlooms, Modern Textile Journal,

      May – June, 2003, P45-48

 

4.      Computer Aided Designing and Manufacturing of woven fabrics, Annual Journal,

      Institute of Jute Technology, 2003

 

5.   Knitting in twenty first century, Modern Textile Journal, July-Sept.,1999, pp30-32

 

6.   Knitting – William Lee and today, Modern Textile Journal,  May-June,1996, pp37-39

 

7.   Computer the key in fabric processing, Indian Textile Journal, December, 1988

 

8.   Recent developments and trends in sizing, Textile Trend, August,1987, pp51-53

 

9.   Selection mechanism and its application in loom, The Textile Industry and Trade

      Journal, Nov.-Dec.,1986, pp17-23

 

10.  The Tri-axial weaving, Textile Trend, February, 1985, pp33-35

 

11. Modern developments in textile machinery, Annual Journal of the Textile Society,

      I. I. T., Delhi, 1981

 

12.  Some aspects of garment manufacturing and knitting, All India Seminar on

      Sustainable development in Jute and Textile Industry, Organised by the Institution

      Of Engineers (I), Kolkata on 26th & 27th March, 2004

 

13.  Application of CAD/CAM in Textiles, Seminar organized by the Students’ Chapter of

      Institution of Engineers (I), College of Textle Technology, Berhampore on 27th

      February, 2004.

 

14.  Scope of Knitting in garment manufacturing, National Seminar on --- organized by

      the College of Textile Technology, Serampore on 23rd January, 2004

 

15.  Measurement of cam force on a dial and cylinder (double jersey) machine using

      piezo-electric force, NCUTE workshop organized by College of Textile Technology

      Serampore on November, 2003.

 

16.  Jute – the Golden Fibre of India, Modern Textile Journal, Jan – Feb, 2004, P70-82

 

17.  Production of diversified jute products/fabrics in handlooms, Modern Textile Journal,

       May – June, 2003, P45-48